Aqualine Reverse Osmosis is a membrane process that can separate undesirable minerals from water where classical purification methods are insufficient. It can be used on sea water, well water with high conductivity and can produce water of high purity.
AQUALINE ALFA SERIES REVERSE OSMOSIS SYSTEMS
1 m3/day to 30 m3/day
STANDART FEATURES
- Membrane vessels FRP or SS
- TFC Spiral wound membranes 2,5” and 4\” diameter
- AISI304 Stainless steel Vertical centrifugal high pressure pump ( Available with ALFA340/440/540/640)
- Brass body rotary vane type pressure pump ( Availabe with ALFA125/140/240)
- AISI304 stainless steel skid
- 5 micron Cartridge filter
- Low and High pressure pipings U-PVC Zonder PN20
- Inlet selonoid valve
- Pump outlet and Drain line pressure adjustment needle valves
- Low and High levels switches
- Product and Drain water line flowmeters
- Recirculation line rotary flowmeters (Availabe with ALFA 340/440/540/640)
- Gliserin filled manometers
- Product water conductivity meter (0-2000µS/cm)
- Autoflush system
- On-Off switch
- Alarm and position indicators
- 220 V/50Hz/3ph ( ALFA 125/140/240 )
- 380 V/50Hz/3ph (ALFA 340/440/540/640 )
- IP56 control panel
Recommended Feed water Limits
Feed water TDS : 0 to 2,000 ppm
Operating pressure 10 to 15 bar
Feed water pressure 2 to 5 bar
Over 3 French hardness degree need to dose Antiscalant
Feed water pH range 6 – 8
Silica (SiO2) Tolerance 25 ppm max. @ 60% recovary
Max. Feed water temperature 30º C Max.
Max Iron (Fe) tolerance 0.05 ppm , If available Antiscalant dosing 0,2 ppm
Hydrogen Sulfide should be removed
Turbidity should be removed ( NTU
