The membranes can’t perform its mission because of forming calcium, mycetes, polymers, silica, sand and impurities on membranes and accordingly blocking the pores on it. So Aqualine Membrane Washing Systems are used to open pores of membranes completely, to start the proses and to treat the water over again.
AQUALINE MEMBRANE CLEANING SYSTEMS
Aqualine Membrane cleaning system is designed on skid and manuel control. A chemical storage tank is mounted on skid. Installed with PVC piping and fittings. Before delivery all wiring, piping and test done in our factory.
STANDART FEATURS
- SS316 Quality cleaning pump
- Operating pressure 3 bar
- 380V/3Ph/50Hz
- 5 micron PP Cartridge SS304 Body Filtre
- Chemical solution tank with cover
- Low level switch
- PVC piping SCH 80 and Ball Valves
- Inline Flowmeter and Manometers
- All equipments are mounted on ss304 quality skid
AVAILABLE OPTIONS
- pH Kontrolör
- Elektrikli ısıtıcı
- Sıcaklık kontrolör
- Şase hareket tekerlekleri
- Mixer
MEMBRANE CLEANING CHEMICALS
Generally Acid and alkaline cleaning chemicals arey used for membrane cleaning. Acid cleaners are designed to remove inorganic and iron deposits and performed at a pH of about 2-3. Alkaline cleaners are designed for removal of biological matter, organic foulants, and silica deposits and performed at a pH of about 10-11.
MEMBRAN CLEANING PROCEDURE
Reverse Osmosis membrane can experience a reduction in performance due to the accumulation of deposits on the membrane surface. Usually mineral scale, colloidal particles, biological matter, and insoluble organic compounds are the causes of membrane fouling. When production flow drops by at least % 15, or the differential pressure increases by % 15 over normal operating conditions, membrane cleaning should be performed. For more information, refer to the operating instructions.
